AC, not cooling
Air Conditioner Doesn’t Cool Cold Air
If your AC unit turns on but doesn’t blow cold air out, make sure that all vents and thermostat settings are correct. The problem is not with the AC system. You won’t be able to get air flow if your filter is blocked by dirt or other debris. Because the clog could cause the evaporator coils and evaporator coils freeze, the ice or frost can clog the air flow. To fix the problem, use a soft brush and mild soap along with water to clean the filter. Keep your filter clean and replace it often to prevent this problem from happening again. The fan or motor may also be in trouble. If the fan doesn’t turn as easily, this could indicate a problem with electrical power or a leakage of the refrigerant. These cases will require an HVAC technician to inspect your unit.
Air Conditioner not Cooling Enough
You should check all the vents and make sure they are open. If any one of the vents is blocked, it could make it difficult to cool the entire house. Because the warm air from the space with the closed vent will combine with the cool air from all the other rooms. If you have other problems, such as a leaky refrigerant, it could be a sign that your system is not working properly. You may also have a problem with your system if it is older or has been installed incorrectly. Systems that are too large will reduce efficiency and cycle on/off too quickly. A system that isn’t small enough for your home can make your home more difficult to cool, which could lead to premature breakdown.
AC Leaking Water
Air Conditioner Leaking Water Inside
Avoid costly water damage by turning your air conditioner off if your unit leaks water. Water may be backing up into your home from the condensate drain line if it is blocked. DIYers might try a wet/dry vacuum on the line to unclog it. If that fails, it could be because your drain pan is rusted or the condensate tank pump has failed. Your technician will be capable of replacing or repairing the damaged parts.
Air conditioner leaks water outside
A little water pool might form under your condenser fan unit during hot, humid days. If the unit is operating in hot, humid conditions, it’s perfectly normal for this to happen. The unit can also leak water in cold weather, usually 60 degrees or lower. In other cases, you can try changing or cleaning your air filters. If that doesn’t resolve the problem, you should schedule a service visit. It is possible that you need more refrigerant.
When turned off, air conditioners leak water
When the system is working, it may freeze if there’s not enough refrigerant in the system or a dirty filter. It will leak water if the ice has melted by the time it is turned off. Water damage can result from an AC unit leaking water onto your ceiling or floor. If the filter is still not working, do not turn on your AC until the problem has been resolved. A blocked or damaged condensate can cause similar problems to outside leaks.
AC Will Not Stop Working
Air Conditioner Won’t Stop Running
A dirty filter could be the reason your AC is running longer than normal. Replace or clean your filter to resolve the issue. An older system or one that isn’t properly sized can also lead to the AC working too hard, cycling too often and having difficulty shutting down. The following are other reasons your AC might run continuously:
- A stuck fan relay
- One short in the thermostat cables
- A thermostat that’s gone bad
Central AC Doesn’t Turn on
Adjusting the thermostat may fix your central air conditioner if it won’t turn on. If the thermostat doesn’t turn on, call a technician.
AC Window Unit won’t kick on
You should also check the temperature setting for a window unit. Also, ensure that no current is entering the system. If none of the above troubleshooting methods fail to identify the problem then call professional AC window unit repair.
AC Fan is not working
Air Conditioner Fan Not Working Inside
Your AC indoor fan may not be working. First check that the breaker has not been tripped. If everything seems fine, then check your air filter. If your air filter is blocked, you might be able fix it yourself. If you find ice on your refrigerant or evaporator lines, let it melt and then check again to verify that the fan is running. The coil may have frozen due to this. Service calls are required for any frozen coil. The technician may need the contact to replace the fan relay, fan belt or motor.
Air Conditioner Fan Not Working Outside
Check your outdoor unit if the AC isn’t cooling correctly. If your outdoor fan isn’t turning, you should first check the fuse box and breaker. If this doesn’t solve the problem, there could be other problems.
- The fan motor or start capacitor is not working: If the compressor is not stopped working, the fan’s motor and/or start capacitor might not be functioning. The fan can be troubleshooted by pushing it with a wooden stick. It is best to not do this manually as the fan could start and cut your fingers if it does. If the fan still does not turn on, contact your local technician. Keep your unit on until she/he arrives. Failure to do so could result in a serious repair, including the possibility of burning your compressor.
- Outdoor fan motor stuck. Dirt, rust or other causes may have caused the fan’s to become stuck. If the fan motor needs to be repaired or replaced, it may be necessary to remove the entire unit.
Your AC system should be repaired. Have your local Christianson’s AC specialist come to your home on a regular basis for a maintenance visit. Regular maintenance will make your system last longer, more efficient, and cost you less in the long term. Do you think it is time to upgrade your air conditioner Christianson’s Furnace repair and AC Repair has the right air conditioner experts. We’re here to serve your home.
I’m not convinced by the information in this post. It seems like it’s oversimplifying the issues and making it seem like DIY solutions are always the answer. It’s important to emphasize the need for professional inspections and repairs.
I see your point, Elizabeth. While the post provides some helpful advice, it’s crucial to recognize when a professional needs to step in to address more serious AC problems.
The advice in this post seems practical, but I still believe that calling an HVAC technician is the safest route to take when dealing with AC problems. It’s better to be cautious, especially with potential electrical or refrigerant issues.
I understand your point, James. Safety should always be the top priority, and professional expertise is essential for certain AC issues.
I think a balanced approach is necessary. It’s good to have an understanding of basic troubleshooting, but knowing when to seek professional help is equally important.
Thanks for sharing these tips! I’ve been having some issues with my AC unit, and this post has given me some ideas on how to troubleshoot them. I appreciate the detailed explanations.
The tone of this post seems overly confident in DIY solutions. It’s important to stress that some AC issues require expert attention, and attempting to fix them independently can lead to further complications.
I agree, Iwalker. While it’s empowering to have some knowledge of AC troubleshooting, caution and discernment are key when deciding whether to handle repairs on your own.
I think the post has its merits, but a disclaimer about the potential risks of DIY AC repairs would be beneficial. It’s important to recognize the limitations of amateur troubleshooting.
We specialize in appliance repair for all of your Sub-Zero and Wolf appliances. We service refrigerators, freezers, dishwashers, washers, dryers and more.
For over 20 years, Sub Zero & Wolf Appliance Repair Chicago has been the company that homeowners in the Chicago area trust.
This post provides very useful and informative tips on how to troubleshoot common AC problems. It’s a great resource for anyone looking to maintain their AC unit properly.
I completely agree. It’s important to know these things to avoid unnecessary expenses with an HVAC technician. The regular maintenance tip is also very useful.